READ BEFORE USING THIS PRODUCTProduct is 2:1 Resin to Hardener Mix Ratio.You will receive 2 parts resin to 1 part hardener. Each kit makes the total amount of product listed once mixed together.Covers 26ft2 per gallon @ 60mils or 1/16 inch. GENERALSC110 is a marine grade, 100% solids epoxy with UV protection additives that offer long term non-yellowing protection with non-blushing and non-chalking properties. SC110 adheres to wood, fiberglass, metal, stainless steel, concrete, stone, canvas, glass and virtually anysurface with 13,500 psi strength. SC110 preserves the substrate with an ultra-clear, scratch resistant finish while remaining flexible enough to withstand vibration and expansion/contraction. SC110 is a specially formulated 2-component epoxy with a modified cycloaliphaticamine curative. SC110 combines a UV absorber coupled with a hindered amine light stabilizer which inhibits degradation of the epoxy from sunlight and protects the exterior with a glossy, glass-like finish that will endure heavy traffic and extreme conditions. SC110 bondschemically and mechanically to the substrate and can be blended with dyes, silica, sands, wood flowers, pebbles and other materials. SC110 forms a polished, highly durable, wear resistant surface and is unaffected by saltwater, fuel, oil, and mild acids while exhibiting long term corrosion proof and chemical resistance protection. SC110 is used for boat building, fiberglass fabricating, wood working, bar top finishing and many other applications.COMPONENTS SC110 is composed of a resin and hardener supplied in a 1, 3, 6, 12 or 15 gallon kits.SC110 resin is a 100% solids no VOC, 2-component, self-leveling, primerless, low odor, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned resin (part A) andhardener (part B) which are mixed at 2 parts resin to 1 part hardener by volume. To use, the part B is added to the part A and then mixed immediately prior to use. VOC = 0 g/l. Following are properties and specifications for SC110: SC110 PROPERTIES AT 77°F (25°C) Properties TypicalTest MethodComponents (A) Resin, (B) Hardener Mixed Density, lbs./gal. (kg/l) 9.2 (1.02) Mix Ratio, pbv (pbw) 2/1(100:45) Color Clear Mixed Viscosity, cP 77F 800ASTM D2393 (D2196)Work Time, minutes 100grams 60ASTM C881Peak Exotherm Temperature 100grams 136°F Application Temperature, °F (°C)IdealAcceptable 70-80 (21-27)50-95 (10-35) Coverage*, ft2/gal @20mils 80 Compressive Strength psi 13,500ASTM D695Tensile Strength, psi 7,503ASTM D638Elongation at Break, % 6ASTM D638Hardness, Shore D 78-85ASTM D2240Adhesion Strength @ 24hrs psi to concrete 780ASTM D4541Flexural Strength psi 12,800ASTM D790Water Absorption @24hrs., % <0.10ASTM D570Thermal Compatibility PassASTM C884VOC g/l 0 *Varies with surface porosity and texture. APPLICATION Application of SC110 is summarized as follows. The 2 components of the SC110 are mixed, and then uniformly applied at the desired thickness typically 20 mils to the cleaned and prepared surface. SC110 will soft gel in 3 hours at 20mils and fully cure in 12 hours at 77°F.CLEAN-UPUse a mixture of MIBK and Butyl Acetate (50/50), Acetone or MEK for cleanup. Skin may be cleaned with denatured alcohol, preferably rubbing alcohol.*Refer to the MSDS for further information.

READ BEFORE USING THIS PRODUCTProduct is 2:1 Resin to Hardener Mix RatioCovers 26ft2 @ 60mils or 1/16 inch. GENERALSC110 is a marine grade, 100% solids epoxy with UV protection additives that offer long term non-yellowing protection with non-blushing and non-chalking properties. SC110 adheres to wood, fiberglass, metal, stainless steel, concrete, stone, canvas, glass and virtually anysurface with 13,500 psi strength. SC110 preserves the substrate with an ultra-clear, scratch resistant finish while remaining flexible enough to withstand vibration and expansion/contraction. SC110 is a specially formulated 2-component epoxy with a modified cycloaliphaticamine curative. SC110 combines a UV absorber coupled with a hindered amine light stabilizer which inhibits degradation of the epoxy from sunlight and protects the exterior with a glossy, glass-like finish that will endure heavy traffic and extreme conditions. SC110 bondschemically and mechanically to the substrate and can be blended with dyes, silica, sands, wood flowers, pebbles and other materials. SC110 forms a polished, highly durable, wear resistant surface and is unaffected by saltwater, fuel, oil, and mild acids while exhibiting long term corrosion proof and chemical resistance protection. SC110 is used for boat building, fiberglass fabricating, wood working, bar top finishing and many other applications.COMPONENTS SC110 is composed of a resin and hardener supplied in a 1, 3, 6, 12 or 15 gallon kits.SC110 resin is a 100% solids no VOC, 2-component, self-leveling, primerless, low odor, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned resin (part A) andhardener (part B) which are mixed at 2 parts resin to 1 part hardener by volume. To use, the part B is added to the part A and then mixed immediately prior to use. VOC = 0 g/l. Following are properties and specifications for SC110: SC110 PROPERTIES AT 77°F (25°C) Properties TypicalTest MethodComponents (A) Resin, (B) Hardener Mixed Density, lbs./gal. (kg/l) 9.2 (1.02) Mix Ratio, pbv (pbw) 2/1(100:45) Color Clear Mixed Viscosity, cP 77F 800ASTM D2393 (D2196)Work Time, minutes 100grams 60ASTM C881Peak Exotherm Temperature 100grams 136°F Application Temperature, °F (°C)IdealAcceptable 70-80 (21-27)50-95 (10-35) Coverage*, ft2/gal @20mils 80 Compressive Strength psi 13,500ASTM D695Tensile Strength, psi 7,503ASTM D638Elongation at Break, % 6ASTM D638Hardness, Shore D 78-85ASTM D2240Adhesion Strength @ 24hrs psi to concrete 780ASTM D4541Flexural Strength psi 12,800ASTM D790Water Absorption @24hrs., % <0.10ASTM D570Thermal Compatibility PassASTM C884VOC g/l 0 *Varies with surface porosity and texture. APPLICATION Application of SC110 is summarized as follows. The 2 components of the SC110 are mixed, and then uniformly applied at the desired thickness typically 20 mils to the cleaned and prepared surface. SC110 will soft gel in 3 hours at 20mils and fully cure in 12 hours at 77°F.CLEAN-UPUse a mixture of MIBK and Butyl Acetate (50/50), Acetone or MEK for cleanup. Skin may be cleaned with denatured alcohol, preferably rubbing alcohol.*Refer to the MSDS for further information.

READ BEFORE USING THIS PRODUCTProduct is 2:1 Resin to Hardener Mix Ratio.You will receive 2 parts resin to 1 part hardener. Each kit makes the total amount of product listed once mixed together.Covers 26ft2 per gallon @ 60mils or 1/16 inch. GENERALSC110 is a marine grade, 100% solids epoxy with UV protection additives that offer long term non-yellowing protection with non-blushing and non-chalking properties. SC110 adheres to wood, fiberglass, metal, stainless steel, concrete, stone, canvas, glass and virtually anysurface with 13,500 psi strength. SC110 preserves the substrate with an ultra-clear, scratch resistant finish while remaining flexible enough to withstand vibration and expansion/contraction. SC110 is a specially formulated 2-component epoxy with a modified cycloaliphaticamine curative. SC110 combines a UV absorber coupled with a hindered amine light stabilizer which inhibits degradation of the epoxy from sunlight and protects the exterior with a glossy, glass-like finish that will endure heavy traffic and extreme conditions. SC110 bondschemically and mechanically to the substrate and can be blended with dyes, silica, sands, wood flowers, pebbles and other materials. SC110 forms a polished, highly durable, wear resistant surface and is unaffected by saltwater, fuel, oil, and mild acids while exhibiting long term corrosion proof and chemical resistance protection. SC110 is used for boat building, fiberglass fabricating, wood working, bar top finishing and many other applications.COMPONENTS SC110 is composed of a resin and hardener supplied in a 1, 3, 6, 12 or 15 gallon kits.SC110 resin is a 100% solids no VOC, 2-component, self-leveling, primerless, low odor, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned resin (part A) andhardener (part B) which are mixed at 2 parts resin to 1 part hardener by volume. To use, the part B is added to the part A and then mixed immediately prior to use. VOC = 0 g/l. Following are properties and specifications for SC110: SC110 PROPERTIES AT 77°F (25°C) Properties TypicalTest MethodComponents (A) Resin, (B) Hardener Mixed Density, lbs./gal. (kg/l) 9.2 (1.02) Mix Ratio, pbv (pbw) 2/1(100:45) Color Clear Mixed Viscosity, cP 77F 800ASTM D2393 (D2196)Work Time, minutes 100grams 60ASTM C881Peak Exotherm Temperature 100grams 136°F Application Temperature, °F (°C)IdealAcceptable 70-80 (21-27)50-95 (10-35) Coverage*, ft2/gal @20mils 80 Compressive Strength psi 13,500ASTM D695Tensile Strength, psi 7,503ASTM D638Elongation at Break, % 6ASTM D638Hardness, Shore D 78-85ASTM D2240Adhesion Strength @ 24hrs psi to concrete 780ASTM D4541Flexural Strength psi 12,800ASTM D790Water Absorption @24hrs., % <0.10ASTM D570Thermal Compatibility PassASTM C884VOC g/l 0 *Varies with surface porosity and texture. APPLICATION Application of SC110 is summarized as follows. The 2 components of the SC110 are mixed, and then uniformly applied at the desired thickness typically 20 mils to the cleaned and prepared surface. SC110 will soft gel in 3 hours at 20mils and fully cure in 12 hours at 77°F.CLEAN-UPUse a mixture of MIBK and Butyl Acetate (50/50), Acetone or MEK for cleanup. Skin may be cleaned with denatured alcohol, preferably rubbing alcohol.*Refer to the MSDS for further information.