ONE QUART OF “LOW ODOR” MOLD, OR MOULD RELEASE OIL #OBR-032 – SOLVENT-BASED, READY TO USE, FOR ALL FORM OR MOLD TYPES EXCLUDING FOAM AND LATEX. USED MAINLY ON PLASTIC MOLDS USED TO MAKE CONCRETE STONE, CONCRETE TILE, MEXICAN SALTILLO, AND OTHER CAST CONCRETE PRODUCTS, LIKE OUR OLDE WORLD MOLDS. NEED MORE THAN A QUART? Order 1 gallon or 5 gallons of from our Store and SAVE. VOC COMPLIANT (Less than 450 g/l) A low odor, oil-based mold release formula for Olde World Molds, metal, fiberglass, wood, and plastic. Will not degrade or warp plastic molds and forms. DIRECTIONS: Apply a light coat of MSP Oil to molds with a hand sprayer from 8”-12” away, or by brush. Wipe excess from the surface, leaving a light coating of oil. The use of a sponge or cotton cloth works best. Do not allow oil to puddle into the deeper mold areas. For best results, apply just before pouring your molds. USE WHEN MAKING CONCRETE STONE, TILE, BRICKS, COBBLESTONE, PAVERS, FAUX STONE, VENEER, CEMENT, AND DECORATIVE CONCRETE WALKING SURFACES. SEE MOLDS ELSEWHERE IN OUR STORE. NEED A TRUE CONCRETE SEALER? BELOW ARE SEALERS AVAILABLE FROM OLDE WORLD AS WELL StoneKote: A water-based penetrating sealer that does not alter the appearance of the substrate. MatteKote: A water-based sealer offering protection with a glossy shine. GlazeKote: A solvent-based sealer offering protection with an ultra-glaze, deep, shine. WE ALSO OFFER CONCRETE COLORANTS IN ONE-POUND AND FIVE-POUND BAGS. OR YOU CAN ORDER A SPECIAL “SET OF FIVE” CONSISTING OF ONE POUND, OR FIVE-POUNDS, OF EACH OF OUR FIVE BASE COLORS. WE NOW OFFER CONCRETE STAINS TOO! EXPLORE OUR “STORE” FOR MOLDS, AND OTHER SUPPLIES. Our molds are made from a special .060 H.I. industrial rubberized ABS plastic… and can be used hundreds of times if cared for per our simple instructions. COMPLETE INSTRUCTIONS ARE INCLUDED WITH EACH PURCHASE. SEE SHIPPING CALCULATOR FOR YOUR SHIPPING CHARGES. WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS… OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE… Become an “Olde World Tile” Producer Today! Since 1992, we’ve trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success! SEE OUR OTHER LISTINGS AND EXPLORE OUR STORE FOR MORE MOLD STYLES AND SIZES, SUPPLIES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES. For additional product information, tile and stone installation photos, and more… visit our extensive websites… TheMoldStore and OldeWorld, or if you have questions, feel free to call or email us.