posting Condition:  New  Sealed Inside Open Box   Potter PAD100-LFSB Features Addressable low-frequency sounder base allows for a single station, grouped, or all call activation May b e mapped to any device connected to the control panel Terminals accept 18 to 12 AWG wire sizes Supports Class A, Class X, and Class B wiring Does not require SLC Loop address, uses PAD sub point addressing feature Complies with the Low-Frequency Signal Requirements per NFPA 72 and UL 464 for Audible Signaling Devices 24 VDC Sounder base power connection supervised internally by each sounder base. No external power supervision relays a re required Description The Addressable Low-Frequency Sounder Base (PAD100-LFSB) i s a sounder base. That may b e utilized in a variety of applications. The base has a locking feature for the sensor that may b e used or removed in the field. The sounder is accessible at the bottom of the unit. The PAD100-LFSB low-frequency sounder base i s designed to meet NFPA 72 sleeping space requirements. To produce a frequency of 520 Hz +/- 10% with a square wave. It i s shown that a lower frequency centered around 520 Hz. Ideal for awakening sleeping occupants, e ven those with mild to severe hearing loss. The base has an independent sounder module that may b e programmed as a single station, zone, or all-call sounder. The PAD100-LFSB passes through the sound pattern sent to the sounder. It may reproduce in any pattern the power supply provides. The PAD100-LFSB does not consume an address on the loop and i s fully programmable to operate with any input. On ce activated the sounder will follow the input from the power source and deactivate. Sell Smarter with Kyozou.Inventory and Ecommerce Management