Lottes Roofing 126 Point West Blvd St. Charles, MO 63303 “Over 30 years experience in single ply flat roofing products!” This 10′ x 25′ 45 Mil EPDM black rubber roofing weighing 77 lbs We have both EPDM solvent bonding adhesive in 5 gal pails only, and latex bonding adhesive to adhere the EPDM rubber to the roofing insulation or substrate. These bonding adhesives have coverage of about 300-350 square feet both surfaces for the solvent bonding and ONE SURFACE WET APPLIED LAMINATE on the Latex bonding adhesive. For this roofing sheet you will need 2 gallon pails of bonding adhesive which you can purchase under our eBay store category of BONDING ADHESIVE listed in our store items or you may click on the link below. Check out my other items We have both WHITE and BLACK EPDM rubber roofing. EPDM is extremely flexible, much like a tire innertube, and extremely strong. EPDM has over 350% elongation, and it’s performance characteristics are stable in temperature ranges from -50 to 240 degrees Fahrenheit before failure. The EPDM membrane also exhibits over 1,300 lbs psi tensile strength, and 150 psi tear strength. Though there are other types of roofing membrane material in the marketplace today, none of them meet all the positive characteristics, ease of handling, and price of EPDM. FORMULATION COLOR SPECIAL APPROVALS ANJ45B & ANJ60B MIL EPDM BLACK UL CLASS A FM CLASS 1 ANJ60W 60 MIL EPDM WHITE UL CLASS A FM CLASS 1 PHYSICAL PROPERTIES ASTM TEST METHOD RESULTS WIDTH, INCHES D751 -0 / +2.0 LENGTH, INCHES D751 -0 / +6.0 THICKNESS, INCHES D751 +10% TENSIL STRENGTH, MIN PSI D412 D1E C 1305 ELONGATION, ULTIMATE MIN. % D412 300 TEAR RESISTANCE, MIN., LBS./INCH D624 DIE C 150 LINEAR DIMENSIONAL CHANGE, MAX.. % (168 HOURS AT 2400 DEGREES F) D1204 +2 BRITTLENESS POINT AT -49 DEGREES F D2137 DOES NOT BREAK OZONE RESISTANCE (168 HOURS / 100 PPHM/1040 F/400 C/505 EXT.) D1149 NO CRACKS AT 7X MAGNIFICATION WATER ABSORBSION, MAX. % (168 HOURS AT 15 DEGREES F/70 C) D471 +8 / -2.0 HEAT AGING (28 DAYS AT 240 DEGREES F) PIN HOLES NO HOLES, COMETS, OR FISH EYES MORE THAN 1/3 DEPTH OF TOTAL THICKNESS SEAMS 2″ MIN. OVERLAP SEAM PEEL STRENGTH 2 INCH / MIN. CROSSHEAD SPEED 15 PLI MIN. SEAM SHEAR STRENGTH 2 INCH / MIN. CROSSHEAD SPEED (BREAK MUST BE MEMBRANE NOT SEAM 30 PLI MIN.) Summary of My Selling Policies Payment All Credit Cards, Company Certified Checks, Bank Checks, Bank Wire, PayPal Fees No sales taxes except in applicable states Shipping US and International Delivery 24-48 hours TO SHIP NORMALLY on in stock items, not counting weekends or holidays Refunds & Returns Returns accepted on qualified items with RGA return number Contact Me BID WITH CONFIDENCE Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Please be prepared to unload the product from the delivery vehicle. Items less than 150 lbs will be shipped UPS or Fed Ex and will deliver directly to your door. Orders over 150 lbs delivered by Trucking Companies DO NOT DO DOOR delivery for residential delivery. It is the responsibility of the CUSTOMER to remove his product FROM or OFF the actual truck. We do NOT offer a lift gate option, that would be an expense item negotiated between the Freight Company and the customer/consignee. If you are unable or unwilling to receive your order via normal delivery according to ICC policies and truck line delivery schedules, then you will be solely responsible for all delivery charges related to attempted delivery and return freight charges. A 15% restocking fee will apply to returned items. Just a note. FREE shipping is ONLY to the lower US 48 states. All other locations will have additional freight, fees, and charges as well as any and all International customs and duties as applicable.Contact us for Volume DiscountsBuy 3 items get 5% EXTRA Discount off items pricingBuy 5 items get 8% EXTRA Discount off items pricingWe currently only ship to the lower 48 sates, not Alaska or Hawaii

Lottes Roofing 126 Point West Blvd St. Charles, MO 63303 “Over 30 years experience in single ply flat roofing products!” This 10′ x 26′ 60 Mil EPDM black rubber roofing weighing 112 lbs is 40 year warranty We have latex bonding adhesive in 2 gal pails that ARE NECESSARY to adhere the EPDM rubber to the roofing insulation or substrate. These bonding adhesives have a coverage of about 100-120 square feet per 1 gallon pail as a ONE SURFACE WET APPLIED LAMINATE. For this roofing sheet you will need 1 pail of bonding adhesive per roll, which you can purchase under our eBay store category of BONDING ADHESIVE listed in our store items or you may click on the link below. Check out my other items We have both WHITE and BLACK EPDM rubber roofing. EPDM is extremely flexible, much like a tire innertube, and extremely strong. EPDM has over 350% elongation, and it’s performance characteristics are stable in temperature ranges from -50 to 240 degrees Fahrenheit before failure. The EPDM membrane also exhibits over 1,300 lbs psi tensile strength, and 150 psi tear strength. Though there are other types of roofing membrane material in the marketplace today, none of them meet all the positive characteristics, ease of handling, and price of EPDM. FORMULATION COLOR SPECIAL APPROVALS ANJ45B & ANJ60B MIL EPDM BLACK UL CLASS A FM CLASS 1 ANJ60W 60 MIL EPDM WHITE UL CLASS A FM CLASS 1 PHYSICAL PROPERTIES ASTM TEST METHOD RESULTS WIDTH, INCHES D751 -0 / +2.0 LENGTH, INCHES D751 -0 / +6.0 THICKNESS, INCHES D751 +10% TENSIL STRENGTH, MIN PSI D412 D1E C 1305 ELONGATION, ULTIMATE MIN. % D412 300 TEAR RESISTANCE, MIN., LBS./INCH D624 DIE C 150 LINEAR DIMENSIONAL CHANGE, MAX.. % (168 HOURS AT 2400 DEGREES F) D1204 +2 BRITTLENESS POINT AT -49 DEGREES F D2137 DOES NOT BREAK OZONE RESISTANCE (168 HOURS / 100 PPHM/1040 F/400 C/505 EXT.) D1149 NO CRACKS AT 7X MAGNIFICATION WATER ABSORBSION, MAX. % (168 HOURS AT 15 DEGREES F/70 C) D471 +8 / -2.0 HEAT AGING (28 DAYS AT 240 DEGREES F) PIN HOLES NO HOLES, COMETS, OR FISH EYES MORE THAN 1/3 DEPTH OF TOTAL THICKNESS SEAMS 2″ MIN. OVERLAP SEAM PEEL STRENGTH 2 INCH / MIN. CROSSHEAD SPEED 15 PLI MIN. SEAM SHEAR STRENGTH 2 INCH / MIN. CROSSHEAD SPEED (BREAK MUST BE MEMBRANE NOT SEAM 30 PLI MIN.) Summary of My Selling Policies Payment All Credit Cards, Company Certified Checks, Bank Checks, Bank Wire, PayPal Fees Depends on State Shipping US and International Delivery 24-48 hours before shipping on in stock items, 3-7 days in shipping time not counting weekends or holidays Refunds & Returns Returns accepted on qualified items with RGA return number Contact Me Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Please be prepared to unload the product from the delivery vehicle. Items less than 150 lbs will be shipped UPS or Fed Ex and will deliver directly to your door. Orders over 150 lbs delivered by Trucking Companies DO NOT DO DOOR delivery for residential delivery. It is the responsibility of the CUSTOMER to remove his product FROM or OFF the actual truck. We do NOT offer a lift gate option, that would be an expense item negotiated between the Freight Company and the customer/consignee. If you are unable or unwilling to receive your order via normal delivery according to ICC policies and truck line delivery schedules, then you will be solely responsible for all delivery charges related to attempted delivery and return freight charges. A 15% restocking fee will apply to returned items. Just a note. FREE shipping is ONLY to the lower US 48 states. All other locations will have additional freight, fees, and charges as well as any and all International customs and duties as applicable.Contact us for Volume DiscountsBuy 3 items get 5% EXTRA Discount off items pricingBuy 5 items get 8% EXTRA Discount off items pricingWe currently only ship to the lower 48 sates, not Alaska or Hawaii

Lottes Roofing St. Charles, MO 63303 “Over 30 years experience in single ply flat roofing products!” 6 cases – 2 rolls 6″ x 100′ rolls/case of vulcanized butyl flashing tape used to seal flash around roof top detail projections overlapping pieces of EPDM deck sheet roofing to form a watertight seal. Need to use primer activator to prime the seam area before applying the 6″ flashing tape. SELF VULCANIZING FLASHING JOINTS All FLASHING DETAIL: shall be sealed using 6″ OR 12″ SELF VULCANIZING FLASHING TAPE. All joints shall be shingled to shed water toward the drains, scuppers, etc. Contact surfaces for the FLASHING TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply primer to surfaces before applying seam tape. The FLASHING TAPE shall be securely bonded to the deck sheet along the previously marked bottom sheet. The flashing shall be formed from side to side to insure a minimum of 2″ overlap of the flashing beyond any edge piece. The release paper shall be carefully removed without disturbing the placement of the flashing or deck sheet. The lap joint shall be “walked in” to fix placement and thoroughly rolled with a 2″ metal roller in the direction perpendicular to the length of the joint. These are 6 cases, 2 – 6″ x 100′ rolls case, and weighs 61 lbs per case and is Plus freight to your location. 48 STATES Call for other freight quotations to Hawaii or Alaska Check out my other items! Summary of My Selling Policies Payment All Credit Cards, Company Certified Checks, Bank Checks, Money Orders, Bank Wire, Paypal Fees No sales taxes except in applicable states Shipping US and International Delivery 24-48 hours to ship NORMALLY on in stock items, not counting weekends or holidays Refunds & Returns Returns accepted on qualified items with RGA return number BID WITH CONFIDENCE Please be prepared to unload the product from the delivery vehicle. Items less than 150 lbs will be shipped UPS or Fed Ex and will deliver directly to your door. Orders over 150 lbs delivered by Trucking Companies DO NOT DO DOOR delivery for residential delivery. It is the responsibility of the CUSTOMER to remove his product FROM or OFF the actual truck. We do NOT offer a lift gate option, that would be an expense item negotiated between the Freight Company and the customer/consignee. If you are unable or unwilling to receive your order via normal delivery according to ICC policies and truck line delivery schedules, then you will be solely responsible for all delivery charges related to attempted delivery and return freight charges. A 15% restocking fee will apply to returned items. UNLESS NOTED OTHERWISE FREIGHT AND DELIVERY CHARGES ARE ADDITIONAL. PLEASE CONTACT US SO WE MAY PROVIDE YOU WITH A DELIVERY FREIGHT QUOTE

Lottes Roofing 126 Point West Blvd St. Charles, MO 63303 “Over 30 years experience in single ply flat roofing products!” 1 roll 6″ x 100′ of vulcanized butyl flashing tape used to seal flash around roof top detail projections overlapping pieces of EPDM deck sheet roofing to form a watertight seal. Need to use primer activator to prime the seam area before applying the 6″ flashing tape. SELF VULCANIZING FLASHING JOINTS All FLASHING DETAIL: shall be sealed using 6″ OR 12″ SELF VULCANIZING FLASHING TAPE. All joints shall be shingled to shed water toward the drains, scuppers, etc. Contact surfaces for the FLASHING TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply primer to surfaces before applying seam tape. The FLASHING TAPE shall be securely bonded to the deck sheet along the previously marked bottom sheet. The flashing shall be formed from side to side to insure a minimum of 2″ overlap of the flashing beyond any edge piece. The release paper shall be carefully removed without disturbing the placement of the flashing or deck sheet. The lap joint shall be “walked in” to fix placement and thoroughly rolled with a 2″ metal roller in the direction perpendicular to the length of the joint. This is 1 roll – 6″ x 100′ and weighs 33 lbs Summary of My Selling Policies Payment All Credit Cards, Company Certified Checks, Bank Checks, Bank Wire, PayPal Fees No sales taxes except in applicable states Shipping US and International Delivery 24-48 hours to ship NORMALLY on in stock items, not counting weekends or holidays Refunds & Returns Returns accepted on qualified items with RGA return number BID WITH CONFIDENCE Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Please be prepared to unload the product from the delivery vehicle. Items less than 150 lbs will be shipped UPS or Fed Ex and will deliver directly to your door. Orders over 150 lbs delivered by Trucking Companies DO NOT DO DOOR delivery for residential delivery. It is the responsibility of the CUSTOMER to remove his product FROM or OFF the actual truck. We do NOT offer a lift gate option, that would be an expense item negotiated between the Freight Company and the customer/consignee. If you are unable or unwilling to receive your order via normal delivery according to ICC policies and truck line delivery schedules, then you will be solely responsible for all delivery charges related to attempted delivery and return freight charges. A 15% restocking fee will apply to returned items. Just a note. FREE shipping is ONLY to the lower US 48 states. All other locations will have additional freight, fees, and charges as well as any and all International customs and duties as applicable. Contact us for Volume DiscountsBuy 3 items get 5% EXTRA Discount off items pricingBuy 5 items get 8% EXTRA Discount off items pricing We currently only ship to the lower 48 sates, not Alaska or Hawaii