ALCM Aluminum Fiber Roof Coating Number 2
When the coating is applied, the aluminum flakes form even, overlapping layers at the surface. ALCM 2# Aluminum Fiber Roof Coating protects your roof from the sun, wind, rain, ice, and snow. Apply by spray with a standard mastic pump and gun.
Read MoreALCM Plastic Roof Cement 1 Gallon
Apply around chimneys, skylights, vent pipes, and gutters or use to repair or set flashings. It can also be utilized with glass or cotton fabrics for repairs where extra strength is required. All gravel must be removed from ballasted roofs.
Read MoreALCM Wet/Dry Roof Cement 1 Gallon – Single Item
Use to repair cracks, splits, or blisters on asphalt built up roofs or to repair or set flashings. Use on damp surfaces to create a tight long-lasting protective seal. Can easily be applied with trowel or putty knife.
Read MoreALCM Low VOC Asphalt Primer
The ALCM Asphalt Primer is a premium blend of asphalts and solvents formulated to penetrate and restore lost oils of old, dry roofing felts. This low VOC primer provides a sound base for the application of asphalt coatings, adhesives, emulsions, and cements. The recommended application rate for this primer is 8 to 16 mils of wet film thickness. ALCM manufactures this Asphalt Primer for use on weathered metal and previously uncoated concrete roofs. Please Note: This Primer is not approved for use with EPDM Rubber Roofing. FeaturesHandles asphalt build up on roofing due to weatheringPromotes adhesion to weathered roof surfacesWeatherproofUse in states with VOC regulations on asphalt primers of 350 g/l or lessCan be used in any OTC stateProduct yield to achieve desired rate will be from .5 to 1.0 gallons per 100 square feet SpecificationsColor: BlackV.O.C Maximum: 350 grams/literPercent Solids by Weight Minimum: 63%Percent Solids by Volume: 56%Flash Point Minimum: 105 Degrees F. (Seta C.C.)Sizes: 1 Gal, 5 GalViscosity at 77 Degrees F: 150-300 S.F.S.1 Gallon Can Weight: 9 pounds and 5 Gallon Can Weigh 41 pounds
Read More