Plastic Straight Male Thread Hose Joiner Barbed Connector Fitting Air Water Pipe

Thread: Male Thread size: 3/4″, 1/2″ , 3/8″ , 1/4″ , 1/8″ Color: Clear Product material: PE material, food grade Product use: non toxic, tasteless, high temperature resistant, suitable for direct connection of hose, convenient and fast Product specification: on the other side of the pagoda, it refers to the minimum outer diameter of the joint edge. Because the hoses are elastic, the diameter at the bayonet of the pagoda joint will be greater than the diameter at the edge. If your hose inner diameter is not among the above, it can be taken as an approximate number. On the thread side, the outer diameter of the 1/2″ thread is about 20mm, and the outer diameter of the 3/4″ thread is about 25mm.

Read More

Plastic Straight Male Thread Hose Joiner Barbed Connector Fitting Air Water Pipe

Thread: Male Thread size: 3/4″, 1/2″ , 3/8″ , 1/4″ , 1/8″ Color: Clear Product material: PE material, food grade Product use: non toxic, tasteless, high temperature resistant, suitable for direct connection of hose, convenient and fast Product specification: on the other side of the pagoda, it refers to the minimum outer diameter of the joint edge. Because the hoses are elastic, the diameter at the bayonet of the pagoda joint will be greater than the diameter at the edge. If your hose inner diameter is not among the above, it can be taken as an approximate number. On the thread side, the outer diameter of the 1/2″ thread is about 20mm, and the outer diameter of the 3/4″ thread is about 25mm.

Read More

1/2in Square End Mill 4 Flute Cutter 2 Pieces

Material-The End Mill is made of High Speed Steel with high hardness, good wear resistance and durability. Application-Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.

Read More

1/2in Square End Mill 4 Flute Cutter 2 Pieces

Material-The End Mill is made of High Speed Steel with high hardness, good wear resistance and durability. Application-Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.

Read More

TMAX 10 pc 1/2″ Rubber Mandrel Sand Drum 1/8″ Shank

(BEST PRACTICES: 1) Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2) During use, periodically power down the rotary tool to check the sand drum.

Read More

TMAX 10 pc 1/2″ Rubber Mandrel Sand Drum 1/8″ Shank

(BEST PRACTICES: 1) Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2) During use, periodically power down the rotary tool to check the sand drum.

Read More

Rubber Sand Drum TMAX 10 pc 1/2″ 1/8″ Shank

(BEST PRACTICES: 1) Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2) During use, periodically power down the rotary tool to check the sand drum.

Read More

Rubber Sand Drum TMAX 10 pc 1/2″ 1/8″ Shank

(BEST PRACTICES: 1) Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2) During use, periodically power down the rotary tool to check the sand drum.

Read More