DARK GUNMETAL metallic powder coatpaint, 1Lb/0.45kg
All items are NEW! FRESH! and VIRGIN! This paint is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. CLEAR COAT SHOULD BE APPLIED FOR ADDITIONAL PROTECTION. MATTE CLEAR ALLOW TO GET ANODIZED GUNMETAL EFFECT. Features Benefits One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – (it can be produced as tribo version upon request) Melting Range 90 – 114 C (Kofler) (194 – 237 F) Gel Time (180 C or 356 F) 100 – 150 sec Tg (DSC) 57,0 0,5 C (134 F ) Product Guide Colour A wide range of colour Surface Gloss GL – Semigloss HR Specific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 C and < 50% RH) Gloss Level 95 % gloss 60 , colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature ( C) ( F ) Time (minutes) 180 356 10 (recommended) 200 392 8 Cured Film Thickness Recommended 60-80 m Theoretical spreading rate at recommended film thickness (70 m) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total.Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreMIRROR GLOSS DIAMOND DARK GUNMETAL metallic powder coatpaint, 1Lb/0.45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN! THIS IS VERY SMOOTH AND MIRROR GLOSS DIAMON DARK GUNMETAL COLOR METALLIC COLOR BASED ON URETHANE RESINE. For outdoor and indoor application. Features Benefits One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – NO Melting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface Gloss GL – Semigloss HR Specific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 99 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 200 392 10 (recommended) Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total.Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreCrinkle Teal Vein Powder Coating Paint, 1Lb/450g
Combined shipping rates and complete product catalogue are below paint description.All items are NEW! FRESH! and VIRGIN! Teal Vein is textured TGIC free powder coating, based on saturated polyester resins especially selected for their good resistance to atmospheric ageing and U.V. radiation. These characteristics combined with good mechanical properties, provide coating films showing good outdoor durability and excellent decorative properties. It is recommended for industrial indoor and outdoor applications. Features Benefits Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – (it can be produced as tribo version upon request) Melting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour Black GoldSurface Wrinkle/WaveSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 40% gloss 60°, Matte/Sand effect Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal part Temperature (°C) ( F ) Time (minutes) 200 392 10 (recommended) Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates:2lb/0.9kg – 16$3lb/1.35kg – 4lb/1.8kg – 23$5lb/2.25kg – 6lb/2.7kg – 33$7lb/3.05kg – 8lb/3.5kg – 43$9lb/3.95kg – 10lb/4.5kg – 52$ Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided.Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. COMPLETE PRODUCT CATALOGUE BUYER SELF SELECTION SETS Low Temperature High Gloss Powder Coating Paint – "Different colors" 1 lb/0.45kg Exterior powder coating paints set "Different colors" 1 lb /0.45kg JIG HEAD FISHING LURE POWDER PAINT 2 oz (54 gram) or 3 oz (81 gram) – METALLICS COLLECTION Gloss metallics High Gloss GOLD Metallic powder coating paint MIRRORLIKE CHROME powder coating paint High Gloss SHINY SILVER powder coating paint CHROME NICKEL powder coating paint High Gloss Chrome Powder Coating Paint High Gloss SPARKLE METALLIC BLACK powder coating High Gloss SPARKLE ANTHRACITE METALLIC powder coating High Gloss DORMANT EMERALD GREEN Powder Coat Paint Matte & Satin metallics Matte Flat SPARKLE SILVER metallic powder coating Paint Satin Metallic COPPER powder coating paint Matte Flat Metallic GOLD powder coating – CHAMELEON COLLECTION High Gloss BLACK CHAMELEON PEARL Powder Coating Paint High Gloss GREEN-BLUE CHAMELEON Powder Coat Paint High Gloss PURPLE-BLUE CHAMELEON Powder Coat Paint High Gloss GREEN-ORANGE CHAMELEON Powder Coat Paint High Gloss VIOLET-GREEN CHAMELEON Powder Coat Paint – TOPCOATS & CANDIES High Gloss Crystal Clear Topcoat Powder Coating Paint High gloss Transparent candy GREEN topcoat powder coating paint High gloss Transparent Candy BLUE topcoat powder coating paint High gloss Transparent Candy RED topcoat powder coating paint High Gloss Transparent candy YELLOW topcoat powder coating paint High Gloss Transparent CANDY ROSE GOLD/POLISH COPPER powder coat paint High Gloss Transparent Candy GREY powder coating paint High Gloss Transparent Candy PURPLE powder coating paint High Gloss DIAMOND SPARKLES CLEAR topcoat Powder Coating Paint High Gloss Clear Topcoat Powder Coating Paint Matte Flat Clear Topcoat Powder Coating Paint – NEON COLORS COLLECTION High Gloss NEON GREEN Powder Coating Paint High Gloss NEON ORANGE Powder Coating Paint High Gloss NEON Yellow Powder Coating Paint High Gloss NEON RED Powder Coating Paint – PEARLESCENCE COLORS COLLECTION Matte/Sand PEARL BLACK Powder Coating Paint High gloss PEARL GOLD Powder Coating Paint High gloss PEARL COPPER Powder Coating Paint High Gloss PEARL BRIGHT RED Powder Coating Paint High Gloss PEARL TEAL Powder Coating Paint High Gloss PEARL Beige/Champagne Powder Paint High Gloss PEARL RUBY Powder Coating Paint High gloss PEARL VIOLET Powder Coating Paint High Gloss PEARL MOUSE GREY Powder Coating Paint High gloss PEARL ALUMINIUM GREY powder coating paint High Gloss PEARL NIGHT BLUE Powder Coating Paint – HIGH GLOSS COLORS COLLECTION High Gloss Orange Powder Coating Paint High Gloss Black Powder Coating Paint High Gloss HOT Pink Powder Coating Paint High Gloss Strawberry Red Powder Coating Paint High GlossYellow Powder Coating Paint High Gloss Bright Red Powder Coating Paint High gloss Tiffany Blue Powder Coating Paint High Gloss Snowy White Powder Coating Paint High gloss CHERRY Red Powder Coating Paint High Gloss BOURDEAUX WINE RED Powder Coating Paint High Gloss Pepsi Blue Powder Coating Paint High Gloss KTM Orange Powder Coating Paint High Gloss Kawasaki GREEN Powder Coating Paint – MATTE COLORS COLLECTION Matte Flat Black Powder Coating Paint Matte Flat Tiffany Blue Powder Coating Paint Matte Flat KTM Orange Powder Coating Paint Matte Flat BLUE Powder Coating Paint Matte Flat GREEN Powder Coating Paint Matte Flat Bright Red Powder Coating Paint Matte Flat Snowy White Powder Coating Paint Matte Flat Yellow Powder Coating Paint Matte Flat DARK GREY Powder Coating Paint – WRINKLE COLORS Black wrinkle Powder Coating Paint Red wrinkle Powder Coating PaintI COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreCrinkle Teal Vein Powder Coating Paint, 1Lb/450g
Combined shipping rates and complete product catalogue are below paint description.All items are NEW! FRESH! and VIRGIN! Teal Vein is textured TGIC free powder coating, based on saturated polyester resins especially selected for their good resistance to atmospheric ageing and U.V. radiation. These characteristics combined with good mechanical properties, provide coating films showing good outdoor durability and excellent decorative properties. It is recommended for industrial indoor and outdoor applications. Features Benefits Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – (it can be produced as tribo version upon request) Melting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour Black GoldSurface Wrinkle/WaveSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 40% gloss 60°, Matte/Sand effect Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal part Temperature (°C) ( F ) Time (minutes) 200 392 10 (recommended) Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates:2lb/0.9kg – 16$3lb/1.35kg – 4lb/1.8kg – 23$5lb/2.25kg – 6lb/2.7kg – 33$7lb/3.05kg – 8lb/3.5kg – 43$9lb/3.95kg – 10lb/4.5kg – 52$ Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided.Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. COMPLETE PRODUCT CATALOGUE BUYER SELF SELECTION SETS Low Temperature High Gloss Powder Coating Paint – "Different colors" 1 lb/0.45kg Exterior powder coating paints set "Different colors" 1 lb /0.45kg JIG HEAD FISHING LURE POWDER PAINT 2 oz (54 gram) or 3 oz (81 gram) – METALLICS COLLECTION Gloss metallics High Gloss GOLD Metallic powder coating paint MIRRORLIKE CHROME powder coating paint High Gloss SHINY SILVER powder coating paint CHROME NICKEL powder coating paint High Gloss Chrome Powder Coating Paint High Gloss SPARKLE METALLIC BLACK powder coating High Gloss SPARKLE ANTHRACITE METALLIC powder coating High Gloss DORMANT EMERALD GREEN Powder Coat Paint Matte & Satin metallics Matte Flat SPARKLE SILVER metallic powder coating Paint Satin Metallic COPPER powder coating paint Matte Flat Metallic GOLD powder coating – CHAMELEON COLLECTION High Gloss BLACK CHAMELEON PEARL Powder Coating Paint High Gloss GREEN-BLUE CHAMELEON Powder Coat Paint High Gloss PURPLE-BLUE CHAMELEON Powder Coat Paint High Gloss GREEN-ORANGE CHAMELEON Powder Coat Paint High Gloss VIOLET-GREEN CHAMELEON Powder Coat Paint – TOPCOATS & CANDIES High Gloss Crystal Clear Topcoat Powder Coating Paint High gloss Transparent candy GREEN topcoat powder coating paint High gloss Transparent Candy BLUE topcoat powder coating paint High gloss Transparent Candy RED topcoat powder coating paint High Gloss Transparent candy YELLOW topcoat powder coating paint High Gloss Transparent CANDY ROSE GOLD/POLISH COPPER powder coat paint High Gloss Transparent Candy GREY powder coating paint High Gloss Transparent Candy PURPLE powder coating paint High Gloss DIAMOND SPARKLES CLEAR topcoat Powder Coating Paint High Gloss Clear Topcoat Powder Coating Paint Matte Flat Clear Topcoat Powder Coating Paint – NEON COLORS COLLECTION High Gloss NEON GREEN Powder Coating Paint High Gloss NEON ORANGE Powder Coating Paint High Gloss NEON Yellow Powder Coating Paint High Gloss NEON RED Powder Coating Paint – PEARLESCENCE COLORS COLLECTION Matte/Sand PEARL BLACK Powder Coating Paint High gloss PEARL GOLD Powder Coating Paint High gloss PEARL COPPER Powder Coating Paint High Gloss PEARL BRIGHT RED Powder Coating Paint High Gloss PEARL TEAL Powder Coating Paint High Gloss PEARL Beige/Champagne Powder Paint High Gloss PEARL RUBY Powder Coating Paint High gloss PEARL VIOLET Powder Coating Paint High Gloss PEARL MOUSE GREY Powder Coating Paint High gloss PEARL ALUMINIUM GREY powder coating paint High Gloss PEARL NIGHT BLUE Powder Coating Paint – HIGH GLOSS COLORS COLLECTION High Gloss Orange Powder Coating Paint High Gloss Black Powder Coating Paint High Gloss HOT Pink Powder Coating Paint High Gloss Strawberry Red Powder Coating Paint High GlossYellow Powder Coating Paint High Gloss Bright Red Powder Coating Paint High gloss Tiffany Blue Powder Coating Paint High Gloss Snowy White Powder Coating Paint High gloss CHERRY Red Powder Coating Paint High Gloss BOURDEAUX WINE RED Powder Coating Paint High Gloss Pepsi Blue Powder Coating Paint High Gloss KTM Orange Powder Coating Paint High Gloss Kawasaki GREEN Powder Coating Paint – MATTE COLORS COLLECTION Matte Flat Black Powder Coating Paint Matte Flat Tiffany Blue Powder Coating Paint Matte Flat KTM Orange Powder Coating Paint Matte Flat BLUE Powder Coating Paint Matte Flat GREEN Powder Coating Paint Matte Flat Bright Red Powder Coating Paint Matte Flat Snowy White Powder Coating Paint Matte Flat Yellow Powder Coating Paint Matte Flat DARK GREY Powder Coating Paint – WRINKLE COLORS Black wrinkle Powder Coating Paint Red wrinkle Powder Coating PaintI COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreHigh Gloss METALLIC MAGIC BLUE powder coating, 1Lb/450g
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN! It is a single stage Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. PROTECTIVE TOP CLEAR COAT NOT REQUIRED Features Benefits Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value +YesMelting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface High GlossSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level up to 95 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 170 138 17 180 356 10 (recommended) 200 392 8 Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreGloss Transparent Candy BRIGHT ORANGE powder coating paint, 1Lb/0.45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN!Compatible with TRIBO GUNS This is transparent high gloss very bright Bright Orange can be applied over real chrome, polished aluminium or stainless steel or over base coat such as chrome or silver metallic. Film thickness, substrate/base color and its reflective properties will affect obtainable color. Our chrome powder paints that can be used as base:High Gloss MIRRORLIKE CHROME! powder coating paint, 1Lb/0.45kgNEW! High Gloss Chrome Nickel powder coating paint, 1lb/0.45kgChrome! High Gloss Powder Coating Paint, 1lb/0.45kg It is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. Features Benefits Available for some RAL colour Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value + YESMelting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface High GlossSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 95 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 170(with chrome) 340 15-18 180 356 10 (recommended) 200 392 7 Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreGloss Transparent Candy MARINE BLUE powder coating paint, 1Lb/0.45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN!Compatible with TRIBO GUNS This is transparent high gloss candy marine blue can be applied over real chrome, polished aluminium or stainless steel or over base coat such as chrome or silver metallic. Film thickness and base shade will affect obtainable color.Our chrome powder paints that can be used as base:High Gloss MIRRORLIKE CHROME! powder coating paint, 1Lb/0.45kgNEW! High Gloss Chrome Nickel powder coating paint, 1lb/0.45kgChrome! High Gloss Powder Coating Paint, 1lb/0.45kg It is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. Features Benefits Available for some RAL colour Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – (it can be produced as tribo version upon request) Melting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface High Gloss Specific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 95 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 180 356 10 (recommended) 200 392 7 Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates to US, UK, Norway, Finland, Sweden, Cyprus, Greece:2lb/0.9kg – 16$3lb/1.35kg – 4lb/1.8kg – 23$5lb/2.25kg – 6lb/2.7kg – 33$7lb/3.05kg – 8lb/3.5kg – 43$9lb/3.95kg – 10lb/4.5kg – 52$ Other countries on request. Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total.Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreGloss Transparent Candy MARINE BLUE powder coating paint, 1Lb/0.45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN!Compatible with TRIBO GUNS This is transparent high gloss candy marine blue can be applied over real chrome, polished aluminium or stainless steel or over base coat such as chrome or silver metallic. Film thickness and base shade will affect obtainable color.Our chrome powder paints that can be used as base:High Gloss MIRRORLIKE CHROME! powder coating paint, 1Lb/0.45kgNEW! High Gloss Chrome Nickel powder coating paint, 1lb/0.45kgChrome! High Gloss Powder Coating Paint, 1lb/0.45kg It is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. Features Benefits Available for some RAL colour Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value – (it can be produced as tribo version upon request) Melting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface High Gloss Specific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 95 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 180 356 10 (recommended) 200 392 7 Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Combined shipping rates to US, UK, Norway, Finland, Sweden, Cyprus, Greece:2lb/0.9kg – 16$3lb/1.35kg – 4lb/1.8kg – 23$5lb/2.25kg – 6lb/2.7kg – 33$7lb/3.05kg – 8lb/3.5kg – 43$9lb/3.95kg – 10lb/4.5kg – 52$ Other countries on request. Combined shipping rates and discounts do not provided automatically. To get combined shipping and discount, please, add to cart and request total.Starting from 4lb/1.8kg additional discount from 5% to 10% (depending on colors) will be provided. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreGloss Transparent Candy BLUE TEAL powder coating paint, 1Lb/0.45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN!Compatible with TRIBO GUNS This is transparent high gloss very bright candy blue teal can be applied over real chrome, polished aluminium or stainless steel or over base coat such as chrome or silver metallic. Film thickness, substrate/base color and its reflective properties will affect obtainable color. Our chrome powder paints that can be used as base:High Gloss MIRRORLIKE CHROME! powder coating paint, 1Lb/0.45kgNEW! High Gloss Chrome Nickel powder coating paint, 1lb/0.45kgChrome! High Gloss Powder Coating Paint, 1lb/0.45kg It is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. Features Benefits Available for some RAL colour Diversity One coat finishes Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value + YESMelting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour A wide range of colour Surface High GlossSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 95 % gloss 60°, colour dependent (for GL and HR) Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 170(with chrome) 340 15-18 180 356 10 (recommended) 200 392 7 Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read MoreMatte Transp Candy VELVET / ANODIZED PURPLE powder coating paint, 1Lb/0,45kg
Combined shipping rates and complete product catalogue are below paint description. All items are NEW! FRESH! and VIRGIN! This is transparent matte candy velvet purple, can be applied over real chrome, polished aluminium or stainless steel or over base coat such as chrome or silver metallic. This finish will provide flat anodized-like look. Film thickness and base color will affect obtainable color. It is a Qualicoat Approved thermosetting powder coatings based on TGIC free polyester binder system designed for exterior applications. It has very good UV and yellowing resistance. Features Benefits Serviceable finish Very Good UV resistance Suitable for most exterior environments No solvents or emissions Less waste and pollution to the environment TGIC free Reduced risk to health Qualicoat Approved Guaranteed performance on correctly pre-treated aluminium It has a multitude of uses over a variety of substrates including steel and aluminium. Performance Guide UV (Weather) It has very good UV resistance. Flow out very good Buchholz Hardness >85 Conical Mandrel 0 mm Cross Hatch Adhesion Gt:0 Direct Impact >25 kgcm Reverse Impact >25 kgcm Tribo Value +YESMelting Range 90 – 114 °C (Kofler) (194 – 237 F) Gel Time (180 °C or 356 F) 100 – 150 sec Tg (DSC) 57,0 ±0,5 °C (134 F ) Product Guide Colour Velvet purpleSurface MatteSpecific gravity 1,5-1,8 gr/cm3 (low with dark colours, high with light colours) Shelf Life 24 months (< 30 °C and < 50% RH) Gloss Level 0 % gloss 60°, colour dependent Application Method can be applied by electrostatic spraying using classic devices which can provide a negative tension of 60-80 kilovolts (corona) and tribo guns. Cure Schedule Metal Temperature (°C) ( F ) Time (minutes) 170(with chrome) 340 20-25 180 356 17 200 392 10 (recommended) Cured Film Thickness Recommended 60-80 µm Theoretical spreading rate at recommended film thickness (70 µm) 8-10 m2 /kg. Practical spreading rates will vary due to such factors as method and conditions of application, specific gravity, surface profile and texture. Store categories: METALLICS (15)CHAMELEONS and HOLOGRAPHIC (7)Transparent CLEAR and CANDIES (16)NEON COLORS (5)PEARLESCENCE COLORS (11)GLOSS COLORS (16)MATTE COLORS (9)TEXTURE COLORS (3)WRINKLES (2)SPAY PAINTS (3)PIGMENTS (111)BUYER SELFSELECTION SETS(53)Other (9) On request – diverse surfaces like: semigloss, semimat, mat, satin, wrinkle, structure, moire, crocodile/snake and any colors/effects you are interested in. Please send a query. Minimum order quantity is 2lb 3oz/1kg. I COMBINED TO SHIPMENT IN ONE PACKAGEORIGINAL and NEW in zip-pack.We ship WORLDWIDE !!! PayPal only!!! For ZhSerg17 Please look in to my other listings for more interesting stuff and save on combined shipping.We are pleased to answer any questions. Thanks for looking!
Read More